Skip to content
Orbitify
Changelog

What changed in Orbitify

Every change we make that people can see, newest first. Each release is named by the day it went out.

November 20, 2026Release 2026.11.20

New

Talk with O-Agent in a call

Press Call beside the box where you type to O-Agent and just talk, hands free. O-Agent hears when you finish, answers aloud, and stops as soon as you talk over it. You can mute, switch to Hold to talk for noisy places, or go back to typing. Leave the chat and the call stays with you as a small ball in the corner. A change to your data still waits for you to say yes or tap Confirm, and some always need a tap, such as one that cannot be undone or one about money, safety, people or setup. A call ends after 5 minutes of quiet or after 20 minutes. We keep the words, never the recording.

In plans with AssistantLink
New

O-Agent finds and speaks your language

You no longer have to pick a language: O-Agent finds which of your languages you speak (the one it heard last, the app's language, your device's languages, English and Vietnamese) and answers in it. A call hears 25 languages and speaks 18 of them aloud, Vietnamese with its own voice; in the others the answer shows on screen. In a call, or in O-Agent, Capabilities, you can still pick one language, and choose O-Agent's voice, slower or faster; your choice stays on your device.

In plans with AssistantLink
New

Start a call by saying "Hey O-Agent"

Turn on "Hey O-Agent" in O-Agent, Capabilities, under Your voice on this device, and say it three times so it learns your voice. From then on, saying "Hey O-Agent" while Orbitify is open starts a call. It is off until you turn it on, and it listens on your device only: nothing is sent until it hears the phrase.

In plans with AssistantLink
Improved

O-Agent hears your names and codes

When you speak to O-Agent, it now checks what it heard against your company's own names: locations, assets, parts, suppliers, clients, people, types, and the start of request and work order numbers. Most names it would have misheard are put right before it answers.

In plans with AssistantLink
Improved

O-Agent's cards work like the app's forms

The cards O-Agent shows in the chat now pick a type, urgency and priority in your company's own words, and a project, supplier or client from your lists, as the app's forms do. Open the full form opens the app's own form, such as Raise a request or New work order, with the card's values filled in, and a card says what will happen when you confirm.

In plans with AssistantLink

November 19, 2026Release 2026.11.19

New

O-Agent makes Word, Excel and PowerPoint files

Ask O-Agent for a report, a list, a letter or slides and it makes the file: Word, Excel, PowerPoint or PDF, in your language, with charts and tables, from figures it reads first. The file shows in the chat with a short preview and Download, and only you can download it. You can also attach a PDF, Word, Excel, PowerPoint, CSV or text file of up to 20 MB to a question for O-Agent to read or work on. Administrators can turn this off with Office files, in Settings under Assistant and AI.

In plans with AssistantLink
New

Knowledge becomes O-Agent's wiki

Knowledge now has Topics: pages about how your company does things, linked to each other, with History and Undo. O-Agent adds what it learns as lines on topic pages and on the pages of assets, locations, asset types and people, each saying where it came from. Readers mark a line Right or Wrong as they read. My pages keeps what O-Agent remembers for you alone, with a switch and Delete all my memory.

New

Routines and a daily brief

Ask O-Agent to do something on a schedule, every day, weekday, week or month at a time you choose, such as "every Monday at 8, list the overdue work orders on my sites". Open Routines in O-Agent to see each one with its last run, Run now or remove it, and turn on your Daily brief: a short summary of what needs you, at the time you pick. Anything O-Agent prepares to change waits for you to confirm, as in the chat.

In plans with AssistantLink

November 11, 2026Release 2026.11.11

New

Time off and on-call in one place

Open Time off and on-call to ask for time off, see your company's holidays and your weekly hours, and see who is on call. A supervisor approves or declines each request, and only approved days count as away on the schedule board. Colleagues see that you are away, never why. On-call schedules hand duty from one person to the next on the days you choose, and someone can cover a turn for a while.

In plans with OperationsLink
New

Record arrival and the client's sign-off

On a work order, press I've arrived when you reach the site. The app records when, how far you are from the work order's location, and photos of how you found it, even with no connection. At the end of the visit the client signs on your phone with their name and whether they are satisfied. A work order type can offer the sign-off or require it before the work order is done: Client signs off the visit, in the type's settings.

In plans with OperationsLink
New

Report extra work found on site

When a technician finds more to do than the work order covers, they press Extra work needed: what it is, the parts and hours they think it needs, and photos. No prices are asked for and nothing goes to the client. The people who plan work see it in the Inbox and turn it into a follow-up work order at the same location, or set it aside with a reason.

In plans with OperationsLink
New

Send after-hours work to on-call

Assignment rules can now send new requests and work orders to the person on call for a team, and can hold only inside or outside your company's working hours, which you set in Settings. Sending work to the team that looks after its asset is now a rule of its own, first in the list, so you can move it. A request given to someone on call is theirs, and they are told at once. A time target can also count the response when the technician arrives on site.

In plans with OperationsLink
New

Work out severity from urgency and impact

In Settings, your company can keep a grid that gives a request's severity from its urgency and how much it affects: one asset, several, or the whole site. Whoever raises a request then says its urgency and impact, and the severity follows the grid. Without a grid, nothing changes: the urgency said is the severity.

In plans with OperationsLink
Changed

O-Agent's abilities are parts of your plan

Knowledge, agents, the apps agents may use, chat apps and websites are now separate parts of your plan, so a company can start with the assistant alone and add the rest as it needs them. Your company keeps what it uses: each new part was added to every plan that already had the parts it needs. Settings has a new AI and agents group, and O-Agent has a Capabilities tab that shows what it can do for your company.

In plans with AssistantLink
Improved

A clearer knowledge graph

The graph on O-Agent's Knowledge tab is easier to read: a location with many things in it folds them until you open it, a Show list picks out pages with lines that disagree, lines not checked yet or the most work orders, and hovering a dot shows its name and links. Dots are sized by how much is known about each one.

November 9, 2026Release 2026.11.09

Changed

One work order for several requests

One work order can now answer several requests, and by default it closes by itself once every request on it is closed (Closes with its requests, on each work order type under Settings, Types and custom fields). A request's urgency sets its work order's priority: Critical to Emergency, Major to Urgent, Moderate to Normal, Minor to Routine. Change or switch this off under Settings, Company profile, Priority from urgency. This took effect with this update, without the usual notice.

What to do, by November 23, 2026

  1. Open Settings, Company profile, and check Priority from urgency; on each work order type under Settings, Types and custom fields, check Closes with its requests.
In plans with OperationsLink
New

See who handles each request

Requests and work orders have a new card, Who handles this. It says who the work waits for now and since when, then every step in order with who does it and why: the team and the rule that chose it, who it was given to, each approval with its people in turn, and who confirms the fix. Below, the team from the top team down.

In plans with OperationsLink
New

My team for supervisors and dispatchers

Supervisors and dispatchers have a new page under Work, My team. For each team they run it shows every person's day, hours planned this week, open work orders, certificates ended or ending soon, and what their job profile still needs. Needs you lists work orders nobody has with the best match, approvals waiting for your yes, and requests about to miss their SLA.

In plans with OperationsLink
Changed

Requests have a title and urgency

A request now has a short title and a description, so lists stay easy to read while the details sit below. What was called severity on a request is now called Urgency on the request screens. The levels and your company's own words for them are unchanged.

In plans with OperationsLink
Changed

A request needs a location

Before, a request could be raised without saying where. Now every request raised in the app needs a location, or an asset that has one, so it reaches the right team and the right files. Systems connected through the connector API are not affected. Raising a request for someone who called or wrote is now its own permission, Raise requests for someone else, given to every role that could already change requests. This took effect with this update, without the usual notice: please tell the people who raise requests, including your clients' people.

What to do, by November 23, 2026

  1. Tell the people who raise requests, including your clients' people, that a request now needs a location.
In plans with OperationsLink
New

Merged requests keep everyone informed

When a duplicate request is merged into another, the people who raised it follow the one you keep: each is told how it goes and sees it in their own list. A request shows who else is following it.

In plans with OperationsLink
New

Choose who confirms a fix

Each request type now says who confirms that a fix worked: whoever raised it (the default), your client's people, the team's supervisors, people with a role, named people, or nobody, in which case the request closes once its work is done. Set it on a request type under Settings, Types and custom fields. The Inbox asks exactly those people.

In plans with OperationsLink
New

Teams hear of new requests

A new request now tells its team's supervisors and dispatchers, or, with no team yet, whoever may change requests. Every company has this as a notification rule, New requests, which you can change or switch off under Settings, Notifications.

In plans with OperationsLink
Changed

Files show for their own location

Before, a request or work order listed every file of the places above it as well, such as the whole site's drawings. Now it shows the files of its own location and of its assets. Whoever raised a request, and whoever follows it, can add their own files to it and remove those they added.

In plans with OperationsLink
Changed

Default step names change; approval step added

Request workflows that still used the platform's own step names now say Closed instead of Resolved, and work order workflows Done instead of Completed; names your company chose are unchanged. Every work order workflow without one also gets a Waiting for approval step after its first planned step, where work waits while an approval rule holds it. This took effect with this update, without the usual notice: check your workflows under Settings, Workflows.

What to do, by November 23, 2026

  1. Open Settings, Workflows, and check the step names and the new Waiting for approval step suit your company.
In plans with OperationsLink
Changed

Assign, schedule and finish in one place

Giving a work order to someone and choosing its day is now one form, Assign and schedule, in place of the separate dialogs. Mark done asks what was done in one sheet. Each work order shows a timeline of when it was made, given to someone, started, paused and done. When a fix is not confirmed, the same work order is taken up again, or a follow-up is made if your company chose that under Settings, Company profile, When the fix is not confirmed.

In plans with OperationsLink
Improved

Approvals name who they wait for

A pending approval now names the people whose yes it waits for, such as Waits for Lan Nguyen (the supervisor of its team), not only the kind of approver. The work order page no longer repeats an approval in its Waiting for box.

In plans with OperationsLink
Changed

Team leads are now called supervisors

A team's Lead is now called Supervisor everywhere. A supervisor now manages the people of the teams they supervise, without a company-wide permission: they add and take out people, move them between member and dispatcher, set their skills and record their certificates. Only someone who manages teams makes or changes a supervisor.

Improved

Roles and teams are easier to read

People now says Company role for what someone may do, and shows when a person runs teams instead of warning that they have no role. A person's page explains company role, job profile and team role in one line. Teams lists your own teams, contractors and client users apart.

Changed

Menus show only what you may use

The menu, Settings and your profile now show only pages you may see or change. Someone without the right to see assets no longer finds Assets or Warranties and contracts; someone in no team of your own no longer sees Skills, Work preferences and certificates on their profile; Settings shows each person only what they may change. This took effect with this update, without the usual notice: if someone misses a page, give their role the permission it needs.

What to do, by November 23, 2026

  1. If someone misses a page they need, open People, Roles, and give their role the permission it needs, such as See asset details.
Fixed

Rules screens say what they do

The Approvals list now calls each work order a work order. The rules pages under Settings name the page you are on, Assignment rules, Service levels (SLAs) or Approval rules, instead of Automation rules. The approval rules help now says that work waits in its Waiting for approval step, and a new assignment rule says its priority is for work orders.

In plans with OperationsLink

November 8, 2026Release 2026.11.08

New

Job profiles say what each person does

Before, what a person does was a line of free text. Now your company keeps its own list of job profiles, such as Electrician or Site supervisor, under People, Job profiles, and each person can have one. A job profile can list the skills and certificates it expects, and People shows what each person still lacks. Every title already typed became a job profile. A job profile gives no access: roles still decide what someone may do.

New

Skills with four levels and a matrix

Your company keeps its own list of skills under People, Skills. A manager sets each person's skills at one of four levels: Learning, With help, On their own and Can teach. The Skills matrix shows everyone's skills in one grid. People see their own skills but cannot set them. Skills are also suggested from the work orders each person has finished in the last year: a manager confirms a suggestion or puts it aside.

Changed

Only managers record certificates now

Before, people and contractor team leads could add certificates, and those waited for someone to check them. Now only managers and administrators of your own company record certificates, with a photo or PDF of the card if you have one, and a certificate counts as soon as it is recorded. Nobody below an administrator records their own. Certificates that were waiting for a check when this changed now count as checked. This took effect on 8 November without the usual notice.

What to do, by December 8, 2026

  1. Open People, Certificates, and look at the certificates added by your people or contractors in recent weeks. Remove any that are not right.
New

Certificate levels and training taken again

A kind of certificate can now have levels, such as a group or a grade, and a work order type or job profile can ask for at least one level. Add a ready-made set adds Vietnam's occupational safety training groups and electrical safety grades. A certificate type can also say it must be taken again after a long time away or a move to another job profile: record time away on the person's page, and the certificate shows Must be taken again until it is renewed. A permit type can name the certificate the person issuing it must hold.

New

Print certificate cards anyone can check

Print card on a certificate in People prints a card with the person's name, the certificate and its dates, and a QR code. Anyone can scan the code on a phone, with no sign-in, and see whether the certificate is valid today, as your company recorded it. The check shows only what the card says.

New

Invite people who have no email

When you invite someone under People, you can now give a phone number with its country code instead of an email address. You get the invitation link to send them by chat or text message. They sign in with their phone number and password, and the app never sends email to them.

Improved

Suggestions use skills and job profiles

When you assign a work order, the suggested people are now ranked by the skills the work order type needs, the job profiles it is for, their certificates, their workload and where they are, and each suggestion says why. Skills and job profiles never stop you choosing someone. When you pick someone other than the first suggestion, you can say why, and Assignment rules shows how often suggestions were passed over and the reasons.

In plans with OperationsLink
Changed

Hourly cost rates belong to Finance

A person's hourly cost rate is no longer shown on the People list. It shows on the person's page only for those who see costs, in companies whose plan includes Finance. A job profile can also have an hourly cost, used for time logged by someone with no rate of their own. Rates already set are kept.

In plans with FinanceLink
Changed

Settings has one page per task

Settings now has one page for each thing you set up, such as People, Company profile, Types and custom fields, Notifications and Connected systems. Legal entities are on Company profile, suppliers are kept under Purchasing, and Budgets and Work packages are tabs of Costs.

Retired

Departments are gone; use teams

Departments decided nothing in the app, so they are gone from people's records, forms and invitations, and the departments people were in are no longer kept. Teams are how a company is organised: they decide who works on what and who is told. This took effect on 8 November without the usual notice.

What to do, by December 8, 2026

  1. If you grouped people by department, put them in teams under Teams.

November 6, 2026Release 2026.11.06.1

New

The portal worker learns a website's form

On a website the portal worker uses, where an administrator has said it may send, Learn a form teaches it a form, such as a warranty claim. You say how to reach the form and give an example for each field. The AI fills the form with your examples and stops at the button that sends it, without pressing it. You approve the steps it learned, and after that each real form is sent only when a person approves it, and the site's reference number is kept when the site shows one. Use test values while it learns: the site sees what is typed.

In plans with Connected systemsLink
Changed

Your AI budget grows with your company

Before, a company that had not chosen an AI budget had $20 a month. Now it has $12 a month for each active person in the company, at least $20, unless your contract with Orbitify sets an amount or your company chose an amount other than $20. One person may use at most five people's share of it each month in chat and voice, never less than $20, so one heavy user does not stop everyone else. An agent whose limit nobody chose may spend up to a quarter of the budget a month, or its old limit if higher. This took effect on 6 November without the usual 14 days' notice. Settings, Assistant and AI shows which amount applies.

What to do, by November 20, 2026

  1. Open Settings, Assistant and AI, check the budget your company now has and how much one person may use, and change the amount there if it does not suit you.

November 6, 2026Release 2026.11.06

New

Compare a turbine's defects across visits

A turbine's page has a new Across visits tab. Each defect is one row, with its blade, side, zone and distance from the root, its severity at every visit, and its trend: New, Worse, Same, Better, Not seen since a visit, Repaired (its request or work order is done) or Not checked (the latest visit did not photograph that part). Defects getting worse come first, so you can plan blade repairs before they become critical. Select a cell to open that photo from that visit.

In plans with InspectionsLink
New

See what you know as a graph

Knowledge has a new Graph tab, first in the list. Each dot is a page you may open, or an asset, location or asset type, linked by where an asset is, what it is part of, its type and the work orders pages cite. It opens with every dot in view; when your company has more than 2,000 dots, it opens on your biggest site. The assistant can open the graph beside the chat.

In plans with OperationsLink
Changed

One work order per turbine from defects

When you raise requests from a turbine's defects, you get one request per blade as before, and now also one work order per turbine that lists every damaged blade. The choice is ticked by default. Requests from drone findings now come only from accepted ones: findings the AI found that nobody has reviewed yet, and rejected ones, are refused, and the dialog says why.

In plans with InspectionsLink
Changed

Ungraded wind defects say Not graded

Before, a wind defect saved without a severity showed as Moderate. Now it says Not graded until someone grades it, in the defect list and the counts. A turbine's PDF report now holds only the accepted defects of the inspection you picked, each with its severity, blade and side, and uses the turbine's own blade length. Rejected defects are kept, hidden by default and left out of reports and counts.

In plans with InspectionsLink
New

Drone inspections add their assets

When solar or wind inspections are turned on for a project, its turbines with their blades, hub and tower, or its zones, blocks and strings, are added to Assets by themselves. Projects that already take drone inspections get theirs once, when this release starts, and a company with no asset types for turbines or strings gets the solar or wind ones. They are kept up as turbines are added, moved or changed and panel reviews are saved. A turbine that is deleted has its assets disposed of, never deleted, and a name you gave an asset stays. Each wind defect now records its blade and side.

In plans with InspectionsLink
Changed

Solar inspections count anomalies one way

Solar inspection setup and review now count anomalies the same way everywhere: detected, pending review and accepted, and reports and the sidebar count accepted anomalies only. Severity follows one scale everywhere, from the temperature difference: Moderate from 5 °C, Major from 10 °C, Critical from 15 °C. An inspection no longer adds its own layer to the map: its image sets and orthomosaics are listed under the inspection, and shapes drawn on the old layer moved to the Notes layer, and one with its own categories stays as an ordinary layer. The panel review is set out as steps.

In plans with InspectionsLink
Fixed

The assistant explains drone and map changes

Before, when the assistant offered to change a drone inspection, a map or a project file, its card and reply could show internal numbers instead of saying what would change. Now the card says it in plain words, such as Add the layer Roads to the map, and its reply says what was done. When it cannot do what you asked, or a map does not open, it says why, in English or Vietnamese.

In plans with AssistantLink
Fixed

Blade defect checks ask for photos

Before, checking the fix of a wind turbine blade defect asked for thermal photos and could name the defect only as a finding. Now the check names the defect, such as Crack, and asks for photos, which a person judges beside the photo of the defect.

In plans with InspectionsLink

November 3, 2026Release 2026.11.03

Fixed

Inspection reports show their photos again

Before, a solar or wind report made by the server left out the photos of its findings. Now each finding in the PDF shows its photo again.

In plans with InspectionsLink
New

Record a voice note for a tip

When you add a tip to an asset, or when you close a work order on it, you can now record a voice note of up to 3 minutes instead of typing. It is written out as text, and whoever checks the tip can listen to it.

In plans with OperationsLink
Improved

Clearer names and severities for wind findings

Every kind of blade damage the AI finds now has a plain name, such as "Surface damage" or "Burnt lightning receptor", and the kinds with no clear name say "Other damage". When a wind finding is approved without a severity, including with "Approve all", it takes the usual severity for its kind; you can still change it. A run where the AI could not check the photos now says so instead of reporting a clean turbine.

In plans with InspectionsLink
Fixed

The map counts each solar panel once

Before, the Solar Panels and Findings totals on a site's map counted each panel and finding twice, once for the colour photo and once for the thermal one. Now each is counted once.

In plans with InspectionsLink
Improved

Run agents again from steps in paths

"Run again from here" now also works on a step inside an if or a choice, not only on the top steps, as long as the last run reached it. The run picks up where that path left off. A step inside a "for each" still starts from the "for each" itself.

In plans with AssistantLink
Improved

Fewer false disagreements to settle in Knowledge

When your plan includes the Assistant, Knowledge now leaves out pairs of lines that can both be true, such as a tip that says "usually" next to a record, or a later tip saying what changed. Lines that truly disagree, such as two different amounts for the same part, still wait for you under To check.

In plans with OperationsLink

November 2, 2026Release 2026.11.02.1

New

See and edit agents as a canvas

An agent made of steps now has List, Canvas and Words on its How it runs tab, all showing the same steps. On the canvas, violet boxes are where the AI decides, green boxes prepare a change for a person to approve, and once the agent has been tested each box says how many test runs reached it. If you may build agents, press "+" on an arrow to add a box from a searchable list of everything you may do, including your saved agents. Open a box to change its settings, and on a box that prepares a change use "Try this box" to see what it would do without changing anything.

In plans with AssistantLink
New

Knowledge, what your company knows

Knowledge in the menu gathers what your records say about each asset, place, kind of asset and person: what failed, which fixes held, and what keeps coming back. Every line links to the records it comes from, and you only see lines worked out from records you may see. When your plan includes the Assistant, you can ask Knowledge a question in your own words: each sentence of the answer names its sources, and it says so when your records do not answer it. A person's page lists only their work: what they worked on and the assets they know, and, for those who may see People, their checked certificates and teams.

In plans with OperationsLink
New

O-Agent edits agents for you to accept

Ask O-Agent to change an agent in your own words. A small change goes straight into the draft and can be undone; a bigger one comes as a list of changes on the canvas, each of which you accept or refuse. O-Agent never publishes an agent: you do.

In plans with AssistantLink
New

Tips from the field, checked by people

People can add a tip to an asset from its page, or when they close a work order on it. The tip shows on the asset's page as not checked until the person named to check tips for that kind of asset checks it, and a checked tip is checked again after 6 months. When your plan includes the Assistant, two lines about the same thing that cannot both be right wait under Knowledge, To check, until someone settles them. Your Inbox shows what waits for you.

In plans with OperationsLink
New

Agents keep what they learn

An agent working in the background may keep a few facts it found, each linked to its records. You see them under Knowledge, What agents keep, only when you may see every record behind them. Administrators can turn a fact into a lesson for the whole company, and the agent's owner or an administrator can forget it.

In plans with AssistantLink
New

Take Knowledge with you as notes

Under Knowledge, Take a copy downloads the pages you may see as linked Markdown notes that open in Obsidian or any notes app.

In plans with OperationsLink

November 2, 2026Release 2026.11.02

Changed

Orbitify checks each drone inspection first

Before, anyone who could change an inspection could run its Setup steps, find and review its findings, and findings showed as soon as they were found. Now Orbitify does every step after Upload, makes new drone inspections, and checks the findings before you see them. Until then, lists say Orbitify is checking it. Once it is shown, your administrators are told, and its findings, reports and requests open to everyone who may see them. Requests are raised only from findings that are shown. Inspections made before today count as shown. You still upload the photos. This change was not announced ahead, as it should have been.

What to do, by December 2, 2026

  1. Tell your team that Orbitify now does each drone inspection's Setup after Upload and checks its findings, and that they see the findings, reports and requests once Orbitify shows the inspection.
In plans with InspectionsLink
Fixed

Findings keep their severity in operations

Before, requests and work orders read nearly every solar finding as moderate, and raising requests from many findings at once gave them all one severity. Now a finding has one severity, set when it is checked and shown in your company's own words, and each request raised from several findings takes the worst of its own findings unless you pick one.

In plans with InspectionsLink
Improved

Turbine findings lead to work orders

Before, a turbine's page had its own incident and work order forms, and its header showed figures nobody had measured, such as Running or the wind speed. Now the turbine page has two tabs: Findings, with what happened to each finding, and Requests and work orders, for the turbine's asset. A finding opens on its own request and work order. The header shows the turbine's number, make, model, serial, rotor size and when it was last inspected.

In plans with InspectionsLink
Fixed

Inspection reports download again

Before, the solar Generate Report and wind Export buttons failed with an error. Now they make the PDF again. A solar report's findings table says what happened to each finding, in plain names, and a wind report covers one visit with only what is known about its turbines. A report of an inspection Orbitify has not shown yet is made once it is shown.

In plans with InspectionsLink
Fixed

Re-checked sites keep their panels and findings

Before, checking a solar site's panels again made every panel anew: findings lost their panel, a string could be listed twice in the asset register, and panels lost their photos. Now a re-check keeps each panel with its shape on the map, its photos and its findings, and each string is listed once.

In plans with InspectionsLink
Fixed

Finish or cancel an upload you left

Before, an upload whose browser tab had closed kept showing as uploading at 0%, with Pause, for a day. Now it says it stopped and offers to finish it or cancel it, and Cancel ends it for good.

Improved

Project maps and turbine pages open faster

Before, every project's Map tab loaded the inspection Setup tools, and opening a turbine read a thousand of your company's work orders and people. Now Setup loads only when it is opened, and a turbine reads only its own requests.

October 31, 2026Release 2026.10.31.2

Changed

Draw and measure on the project map

Before, a project's drone inspections had their own tabs on the project page, and you could draw and measure on a solar inspection's map. Now you open inspections from Inspections, under All sites in the Map tab's side panel (on a phone, under Layers), and Project map takes you back. Drawing and measuring are done on the project map only. In solar inspection Setup and finding review, the map shows block outlines, panels, strings and where findings are, but you can no longer draw, reshape or move them there; a finding can still be put on a panel, or moved to another, by picking the panel. This change was not announced ahead, as it should have been.

What to do, by December 1, 2026

  1. Tell your team that drawing and measuring are now done on the project map, and that in solar inspection Setup and finding review they can no longer draw, reshape or move anything on the map, only pick the panel a finding is on.
In plans with InspectionsLink

October 29, 2026Release 2026.10.29

Improved

One place for every project

Before, sites, locations and drone projects lived in different menus. Now one sidebar leads to Projects, and each project has its Overview, Map, Files and Settings, with its locations, assets, requests, work orders and inspections inside. Give a project a photo from your own pictures or shared ones, and it shows on cards and on Home. A project you no longer work on can be archived instead of deleted: it leaves your lists, nothing in it is removed, and you can bring it back at any time.

New

Import any file and review it first

Before, only lists of records could be imported. Now Imports and exports takes spreadsheets, map files, documents, drawings and photos through one door. Orbitify recognises what each file is, suggests how it maps to your locations and assets, and shows every change for review before anything is saved. Spreadsheets laid out in other ways are read too, such as one record per column. A confirmed import can be taken back within 7 days, and a whole project can be exported as map files or as one ZIP of its original files.

New

Connect your other systems

Settings now has Connected systems. Each system you connect gets its own account with the roles you choose, keys that last a year, and a record of everything it changed. Your systems can create and update records under the same rules as people, and hear what changes through signed webhooks or an events feed. A safety switch pauses a connection that suddenly changes far more than usual, and tells your administrators.

In plans with Connected systemsLink
Improved

The assistant plans changes, you approve once

Ask the assistant to do several things and it proposes them as one change set: approve it with one tap, and take it back within 7 days if nothing has changed since. Answers show the records they are about as cards, and it can look at photos you add. Home now opens on the assistant, with today's Home one tap away. Every answer is marked as made by AI, and removing anything always waits for your tap. Administrators choose in Settings, under Assistant and AI, whether it may change things, only read, or is off, and set one monthly AI budget.

In plans with AssistantLink
Improved

Faster pages, even on slow connections

Orbitify is much quicker to start and to use. On a slow connection the app is ready about a second after you sign in, where it took five. Large lists open at once: a location with thousands of assets, a site's drone findings and a wind farm's turbine photos now load in under a second, where some took over a minute.

New

Agents that prepare work for you

O-Agent now has an Agents tab. Turn on an agent from the library, such as Late work, Low stock, New request check, Warranty claim finder or Certificates and permits watch, and it runs on a schedule or when something happens. The library shows the agents for your industry first. Before it starts, you see what it would have prepared over the last 30 days, and it watches for a week by default. Nothing an agent prepares happens until you say so: it prepares a card in your Inbox, under Prepared by agents, and you approve it, change a step, or refuse it. The one exception is plain emails that an administrator lets an agent send without a tap.

In plans with AssistantLink
Changed

A finding is fixed once someone checks

Before, a drone finding showed as Fixed as soon as its work order was done. Now it shows as Work done, not checked, until someone checks it. Choose Check the fix on the finding, or turn on the Check the fix agent to propose checks for you: a new flight, approved by the person you name, or photos taken on site. Orbitify compares the same panel or blade side before and after a new flight, and a person who did not do the work confirms Checked fixed or Still there, which reopens the request. While a check is open, its request waits for it instead of closing by itself. This change was not announced ahead, as it should have been.

What to do, by November 28, 2026

  1. In Settings, under Inspections, open Checking fixes and choose who confirms a fix and who approves a re-inspection flight.
  2. If your company does not check fixes, switch checking off there, so no check is proposed.
In plans with InspectionsLink
Changed

Roles decide what each person sees

Before, most people saw every request and work order in the company, and a change to someone's role meant they had to sign in again. Now people see the requests they raised, the work orders they are on and their teams' work; give the ability "See all requests and work orders" to anyone who needs everything. A role can be given for one project only, and someone whose roles are all for projects sees only those projects. You can set a role one permission at a time if you need to, and changes apply within about a second, without signing anyone out.

New

Pages for every work order and asset

Each work order and asset now has its own page, opened with Open page from any side panel. It shows what was done, by whom and when, its tasks and parts, and for an asset its reliability and maintenance plans. Print a work order sheet with a QR code that opens it again. Cards on My work and Home say each work order's next step. A kind of work can require a permit to work before it starts, approval rules remind whoever has to decide, and a maintenance date can be skipped or moved with a reason.

In plans with OperationsLink
New

See how long work has waited

Reports now has a Backlog page, also shown on Home: every open work order you can see, by how long it has been open, by priority, and whether it is ready or held back, for example waiting for an approval, parts, a permit or a visit the client has agreed.

In plans with OperationsLink
New

Track parts by serial, compare supplier prices

Parts that are repaired and reused can now be tracked one by one, each with its serial number and history: fitted, taken out, sent for repair and back with its cost. Ask several suppliers for prices in one quote request, record their replies, see them side by side with the cheapest marked, and turn your choice into purchase orders. Supplier pages show deliveries on time and problems, a delivery can record damaged or short items, and stock counts can run on a schedule.

In plans with Stock and buyingLink
New

Invoices, budgets and client billing

Supplier invoices are now matched to what was ordered and received, and differences wait for a decision. Export invoices, work order costs and client bills to your accounting system as CSV files. Set budgets for a cost centre, location or client and be told when spending reaches your limit. Bill clients for the work done in a period at their own rates, and see what each asset is worth as it depreciates.

In plans with FinanceLink
New

Work with partner companies and clients

Messages with photos can now be written on any request or work order, shared with the client's people or kept for your own team. A client's people can agree a visit time before anyone goes to site. Two companies on Orbitify, such as a building owner and its service company, can link their accounts: a request sent across follows its work on both sides, with its messages and visits. A client's people now also see the work orders at their locations, unless you keep one from them.

In plans with OperationsLink
New

Record work with no connection

On a phone, the work orders you are on are kept on the device. With no connection you can still record tasks, readings, photos, messages, time and a failure report; they are sent in order when you are back online, and nothing is sent twice. If something is refused, the reason stays on the phone so you can put it right and try again.

In plans with OperationsLink
Improved

Draw, import and download on the map

Every project's map now has ready layers to draw on, such as assets, zones, roads and access, utilities and safety, plus layers from your industry's lists. Import shapefiles, GeoJSON, DXF, KML and CSV points, see the photos taken over a location, and download several files as one ZIP. Drawings you add read their own labels and pin the rooms and assets they name.

New

A public page for developers

Developers building an integration can now read the developers page without signing in. It lists every action, read and event with examples, and links to the API description they can load into their own tools. It is built from the live platform, so it is always current.

In plans with Connected systemsLink
New

Try changes in a test company

Administrators can make one test company: a copy of your setup and, if you like, your locations and assets with the same numbers, but with no people, work or money in it. Try a new workflow or a connected system there, then remove it when you are done. Every page inside says it is a test company, with the way back.

In plans with Connected systemsLink
New

Readings raise requests by themselves

Maintenance plans now have condition rules. A rule watches an asset's readings, whether recorded by hand, on a work order or sent by another system, and raises one request when a value passes its limit, rises too fast or drifts. Set how long it must last before it counts, test the rule against past readings before you switch it on, and see why each request was raised.

In plans with OperationsLink
New

Live readings from your sites

Your site systems can now send live readings to Orbitify, read only: nothing is ever sent back to a control system. New tags are listed for you to match to assets, an asset's page shows its live values, and condition rules read them, so a problem raises a request. Counters feed maintenance by meter, and the source's owner and your administrators are told when a source goes quiet.

In plans with Live dataLink
Retired

Older screens have left the menu

The older checklists, the older asset register, and Inventory and Warehouses have left the menu, because the newer pages do everything they did. Old links still work: they open the page that replaced them, such as the checklists in Setup, My work and Work orders.

Improved

Wind inspections work like solar ones

Wind projects now have the same Inspections list as solar ones. A wind turbine stays the same turbine at every visit, and each inspection keeps its own photos and findings, so you can compare visits. Each turbine has its page inside the project, and adding a turbine takes a few short steps that make its blades, hub and tower at once.

In plans with InspectionsLink
New

Describe your own agent in words

Say what you want in your own words, such as "each morning, ask for more detail on new requests that say too little", and O-Agent drafts the agent as steps you can read and change in How it runs, step by step. A plain rule is offered as a rule with no AI. Every change becomes a new version beside the live one, tested on past days, and you publish it when you are happy. Share an agent with your company's library once an administrator has checked it, and an administrator can hand an agent to someone else, who takes it over.

In plans with AssistantLink
New

Teach O-Agent your company's way

Anyone who may build agents can write your company's know-how once as a skill, such as how to handle a chiller trip, and O-Agent and your agents follow it. Pick one with "/" in the chat, or let O-Agent read the one it needs. Start a skill from one of your documents, or press Save this as a skill under a good answer: it is drafted from how the answer was found, never from the records it read. A skill for the whole company waits for an administrator's check. Find them on O-Agent's Skills tab.

In plans with AssistantLink
New

Charts in answers, pinned to Home

Ask O-Agent how many requests were fixed on time, or which assets fail most, and it answers with a chart, a headline number or a list. Orbitify counts every number from your data, exactly as the lists do, never the AI. Pin a chart to Home and it is counted again each time you open it. An administrator can mark a chart answer as verified, and the same question is then answered the same way for everyone, as their own figures.

In plans with AssistantLink
New

Make a report by asking

Ask O-Agent for a report, such as "this month's work orders by site, with the overdue list", and it opens beside the chat. Change it in words, such as "drop the backlog chart". Save it under Reports, share it, send it on a schedule, pin it, or export it to Excel or PDF. Everyone who opens it sees their own figures, counted for what they may see, and its summary is written again from those figures.

In plans with AssistantLink
New

Set up your company from your files

A new company can start from the files it already has. In Settings, choose Set up step by step, then Set up from your files, and bring in your asset register, schedules and checklists. O-Agent drafts what is missing a layer at a time: kinds and fields, workflow steps, teams, checklists, the import of your records, then maintenance plans. Each item says the file and column it came from, and anything the files leave open is a question for you. An administrator applies each layer and can take it back within 7 days. Nothing is changed until you apply it.

New

Give agents a mailbox and the weather

In Settings, under Connected systems, an administrator, or anyone allowed to connect other systems, can connect a company mailbox by IMAP and SMTP, so agents can prepare emails such as a reminder to a supplier, and the weather, so outdoor work is planned on a good day. An email waits for a person's tap before it is sent, unless an administrator lets one mailbox's plain messages go for an agent whose cards were approved unchanged many times. Your company's own tools can be added too, through MCP: each tool is allowed one by one, and asks again if it changes.

In plans with Connected systemsLink
New

See what is new in Orbitify

What's new, in your account menu, lists each change with the date it arrived, and a New mark shows on the menu items that changed. Administrators are told in their Inbox, with a date, about any change they must act on or that is coming, and see them all in Settings, under Changes to Orbitify. The same notes are on the public changelog.

New

A dated version for the connector API

Send the Orbitify-Version header, such as Orbitify-Version: 2026-10-24, to name the version your integration was written for; every answer says which version it followed. The API changes only by adding. A change that cannot be made by adding comes as a new version, announced at least 6 months before the older one ends, and a call to an action on its way out answers with the Deprecation and Sunset headers and a link to what to do.

In plans with Connected systemsLink
Changed

Home is one page again

Before, Home had two tabs: Ask O-Agent and your dashboard. Now Home is one page: a box at the top asks O-Agent anything, then your projects, the charts you pinned, and what matters for you, such as what waits for you and your work orders. Worth doing today and the phone's Hold to speak have left Home: Speak in the box opens voice on the O-Agent page. In the menu, after Home, O-Agent and Inbox, come Projects, Work, Assets, Stock and buying, and Finance. This change was not announced ahead, as it should have been.

What to do, by November 28, 2026

  1. Tell your team that Home is now one page and that the menu's groups have moved.
Changed

The map shows what is open

On a project's map, each place is coloured by what is open there: red where work is late, amber where a request or work order is open, grey where all is quiet. Tap a place to see its open requests, open work orders, overdue work and assets. Requests and work orders keep their own pins, and assets other than wind turbines no longer show as pins. The top of the map's side panel shows the whole project at a glance, and each number opens the list it counts. This change was not announced ahead, as it should have been.

What to do, by November 28, 2026

  1. {Tell your team that assets other than wind turbines no longer show as pins on the map=tap a place to see them.}

How we change Orbitify

New things and fixes go out as soon as they are ready. A change to how you already work, or one that asks something of you, is announced ahead, by this much:

Kind of changeNoticeHow you hear
A new feature, an improvement or a fixNone: announced on the dayWhat's new and this page
A change to how existing work is done: a moved screen, a renamed step, a new required field, a default switched onAt least 14 daysA notice to your administrators, and a coming change in What's new
An administrator must act; a feature is removed; where data is kept, or which AI model or region answers, changesAt least 30 days, with a date to act byA notice to your administrators by email and in the Inbox until one of them acknowledges it, and a reminder 7 days before
A change that breaks what a connected system does through the API or webhooksAt least 6 months, under a new API versionThe API changelog on the developers page, an email to whoever answers for each connection, and Deprecation and Sunset headers
A security fixNone: explained afterwardsThis page

Building on the API? See the developers page for its version and its own changelog. Developers